//
you're reading...
Anti Vibration Gloves, Impact Gloves, Canvas Gloves, Chemical Resistant Gloves, Coated Gloves, Cold Weather Gloves, Cut Resistant Gloves, Disposable Gloves, Drivers Gloves, Gloves and Hand Protection, Handling Gloves, High Heat Gloves, Leather Palm Work Gloves, Linemans Gloves, Puncture Resistant Gloves, Welding Gloves

Choosing the Right Work Gloves!

It is a tough decision when choosing the right work gloves for a specific task, to ensure that the hands and arms of workers are protected from hazards.  Hopefully, the following information will point you in the right direction*.

However, it should be noted that usually work gloves are not worn during the operation of machinery*, due to the possibility of gloves getting caught in the moving parts of a machine.

*Be sure to check with a certified safety professional or OSHA if unsure of whether this hazard applies to your environment.

Usually the first step in deciding which type of work gloves to order is to decide which hazards may be present in your workplace and plan your work wear accordingly.

OSHA divides work gloves into four categories:

  •     leather, canvas or metal mesh gloves
  •     fabric and coated fabric gloves
  •     chemical and liquid-resistant gloves
  •     insulating rubber gloves

Leather, canvas or mettle mesh work gloves

Leather work gloves, as well as canvas or mettle mesh gloves, are suitable for heat, cold and impact / penetration hazards that result in cuts, abrasions, burns and frostbite. This category of work gloves includes aluminized gloves, aramid fiber gloves and synthetic gloves.

The market has a wide selection of leather welding gloves, for which goatskin leather is favored since it is durable, yet thin and pliable.

Fabric and coated fabric work gloves

Fabric gloves provide a more basic form of hand protection from dirt, chafing and abrasions; however, they won’t protect you from rough, sharp or heavy objects.

For added protection and slip-resistance for better handling, fabric gloves can be coated with plastic, but still are used only as a general-purpose work glove.

Chemical and liquid-resistant work gloves

As a general rule, the thicker the work glove, the better the protection against chemical hazards; however, glove material properties react differently.  Please visit this link to reference a helpful glove selection chart for break through times in relation to chemicals.  It is always recommended that you check the MSDS sheet(s) that comes (or should be available) with the product you’re using or in contact with. Before reusing any safety gloves that have been exposed to chemicals, check the chemical’s toxicity. They will need to be thoroughly cleaned, or you may need to discard the gloves after each use, even extended use type gloves.

*Always check with a certified safety professional or OSHA if unsure.

To protect against the spread of contamination – particularly as worn by healthcare workers – and from exposure to harmful chemicals, general-purpose latex gloves have been worn for decades, only recently falling out of favor since they’ve been recognized as an allergen for many latex glove wearers.

To get around the allergenic aspect of latex, nitrile gloves have proven to be a suitable alternative. As well, nitrile gloves are superior to latex gloves when it comes to handling oils, greases and some chemicals.

Insulating rubber work gloves for electrical work

Insulating rubber gloves should be worn whenever electrical hazards are a risk.

North Carolina State University also provides a hand protection reference guide that outlines the type of gloves needed for various hazards.

As part of your routine maintenance, work gloves of any variety need to be inspected before each use for holes, tears or any other damage that could make them vulnerable to losing their protective qualities.

All Safety Products, Inc., provides a wide variety of work gloves for almost every situation to include  anti-vibration, coated, cold weather, chemical resistant, cut resistant, disposable, drivers, handling, high heat, leather palm, linemans, puncture resistant and welding glove types.

About AllSafetyProducts

President of All Safety Products, Inc. We are a reseller of industrial safety products and specialize in product knowledge for PPE (personal protective equipment) used in the following industries: (1) Agricultural; (2) Military; (3) Federal Government; (4) Construction; (5) Manufacturing; (6) Education; (7) Food; and many others... Please be sure to visit our website, http://www.allsafetyproducts.com .

Discussion

No comments yet.

Leave a Reply

Safety Categories

Follow Our Safety Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 332 other subscribers

%d bloggers like this: